Asbestos Removal/Deltona-Daytona Beach-Ormond Beach, FL
Deltona-Daytona Beach-Ormond Beach, FL

How Much Does Asbestos Removal Cost in Deltona-Daytona Beach-Ormond Beach, FL?

Estimated local cost for asbestos removal in Deltona-Daytona Beach-Ormond Beach, FL, based on regional cost-of-living data. Updated April 2026.

Quick Answer: The estimated cost of asbestos removal in Deltona-Daytona Beach-Ormond Beach, FL is $1,450$9,625 ($25 – $100 per square foot). Average: $3,375.Deltona-Daytona Beach-Ormond Beach, FL is 4% below national average.

Source: ClearCost national data adjusted by BEA Regional Price Parity for Deltona-Daytona Beach-Ormond Beach, FL — updated April 2026

Deltona-Daytona Beach-Ormond Beach, FL

$3,375

Estimated range: $1,450$9,625

$25 – $100 per square foot

National Average

$3,500

Range: $1,500$10,000

Deltona-Daytona Beach-Ormond Beach, FL is 4% below national average based on BEA RPP data.

About these estimates: These prices are derived from our national pricing data adjusted for Deltona-Daytona Beach-Ormond Beach, FL's cost of living (BEA Regional Price Parity: 96.2). Actual costs vary based on specific project requirements, contractor availability, and local material sourcing. See the national cost guide for full details.

Cost at a Glance — Deltona-Daytona Beach-Ormond Beach, FL

Regionalized Cost Breakdown

National Average$3,375
Typical Range$1,450 – $9,625
Small Area (floor tiles, small insulation)$475 – $1,925
Whole-Home Abatement$19,250 – $57,725

Asbestos removal (abatement) is a highly regulated, hazardous material process that must be performed by licensed professionals. Homes built before 1980 commonly contain asbestos in insulation, floor tiles, ceiling tiles, roofing materials, and pipe wrap. The national average runs around $3,500 for a moderate abatement project.

Cost by Material Type

Different asbestos-containing materials require different removal approaches. Friable asbestos (easily crumbled, like pipe insulation or spray-applied materials) is the most dangerous and expensive to remove. Non-friable asbestos (bonded into solid materials like floor tiles) can sometimes be encapsulated rather than removed.

Cost by Asbestos Material Type

Floor Tiles (per sq ft)$0$25
Popcorn Ceiling (per sq ft)$0$0
Pipe Insulation (per linear ft)$0$25
Attic Insulation (per sq ft)$0$25
Roof Shingles (per square)$200$575
Siding (per sq ft)$0$25

Labor Costs in Deltona-Daytona Beach-Ormond Beach, FL

$72,300

All asbestos abatement work must be performed by licensed contractors wearing full PPE. The work area is sealed with negative air pressure and plastic sheeting before work begins.

Enhancement & Improvement Costs

Asbestos Testing / Sampling$200 – $575
Air Quality Testing (post-abatement)$250 – $475
Encapsulation (alternative to removal)$0 – $0
Replacement Insulation (after removal)$0 – $0

What Drives the Cost

  • Type and amount of asbestos-containing material
  • Friable vs. non-friable condition
  • Encapsulation vs. full removal
  • Accessibility of the material
  • Local disposal regulations and fees

Pro Tips

  • Do not disturb suspected asbestos-containing materials before testing
  • Hire only licensed asbestos abatement contractors
  • Get post-abatement air clearance testing from an independent party
  • Check if your homeowners insurance covers abatement in renovation scenarios

1–5 days for most projects; whole-home abatement may take 1–2 weeks

Asbestos Removal FAQ

Should I remove asbestos or leave it alone?

Asbestos in good condition and not likely to be disturbed can often be left in place safely. Removal is necessary when you are planning renovations that will disturb the material, or if it is already damaged and deteriorating.

How do I know if my home has asbestos?

Visual inspection cannot confirm asbestos — you need lab testing of material samples. An asbestos inspector collects samples and sends them to an accredited lab. Testing typically costs $200–$600.

ClearCost is expanding to Deltona-Daytona Beach-Ormond Beach, FL

Get notified when our Fair Market Rate™ calculator and verified contractor matching launches in Deltona-Daytona Beach-Ormond Beach, FL.