Estimated local cost for concrete driveway in District of Columbia, based on regional cost-of-living data. Updated April 2026.
Quick Answer: The estimated cost of concrete driveway in District of Columbia is $3,500 – $11,650 ($4 – $8 per square foot). Average: $7,000.District of Columbia is 17% above national average.
Source: ClearCost national data adjusted by BEA Regional Price Parity for District of Columbia — updated April 2026
District of Columbia
$7,000
Estimated range: $3,500 – $11,650
$4 – $8 per square foot
National Average
$6,000
Range: $3,000 – $10,000
District of Columbia is 17% above national average based on BEA RPP data.
About these estimates: These prices are derived from our national pricing data adjusted for District of Columbia's cost of living (BEA Regional Price Parity: 116.5). Actual costs vary based on specific project requirements, contractor availability, and local material sourcing. See the national cost guide for full details.
A concrete driveway is one of the most durable surfaces for your home, typically lasting 30–50 years with proper care. The national average cost to install a concrete driveway runs around $6,000 for a standard two-car width. Key cost drivers include square footage, concrete thickness, decorative finishes, and whether existing pavement must be removed first.
Driveway size is the primary cost driver. A single-car driveway is typically 10–12 feet wide, while a two-car driveway runs 18–24 feet wide. Most contractors price concrete work by the square foot.
Plain broom-finished concrete is the most affordable option, but decorative options like stamped or exposed aggregate concrete improve curb appeal significantly.
$25
Labor typically accounts for 40–50% of the total project cost. Most crews can pour and finish 500–800 sq ft per day.
1–3 days for installation; cure 7 days before driving on it
For standard passenger vehicles, 4 inches is the minimum recommended thickness. For heavy SUVs or light trucks, 5 inches provides added durability. For RVs or delivery trucks, pour at 6 inches with rebar reinforcement.
Wait at least 7 days before driving on new concrete, and ideally 28 days for full cure strength. Light foot traffic is okay after 24–48 hours.
Asphalt is cheaper upfront at $2–$5 per square foot installed, but requires resealing every 3–5 years. Concrete costs more initially but lasts 30–50 years with minimal maintenance.
ClearCost is expanding to District of Columbia
Get notified when our Fair Market Rate™ calculator and verified contractor matching launches in District of Columbia.