Estimated local cost for crown molding installation in Minnesota, based on regional cost-of-living data. Updated April 2026.
Quick Answer: The estimated cost of crown molding installation in Minnesota is $675 – $2,925 ($4 – $15 per linear foot). Average: $1,475.Minnesota is 2% below national average.
Source: ClearCost national data adjusted by BEA Regional Price Parity for Minnesota — updated April 2026
Minnesota
$1,475
Estimated range: $675 – $2,925
$4 – $15 per linear foot
National Average
$1,500
Range: $700 – $3,000
Minnesota is 2% below national average based on BEA RPP data.
About these estimates: These prices are derived from our national pricing data adjusted for Minnesota's cost of living (BEA Regional Price Parity: 97.7). Actual costs vary based on specific project requirements, contractor availability, and local material sourcing. See the national cost guide for full details.
Crown molding adds an elegant finishing touch to any room, bridging the gap between walls and ceilings with decorative trim. The national average cost to install crown molding in 2026 is approximately $1,500, with most homeowners spending between $700 and $3,000 depending on the material, profile size, and linear footage. Installation in a standard 12×12 room typically runs $300–$600, making it one of the most cost-effective ways to add visual impact and perceived home value.
Crown molding is available in a range of materials, each offering different aesthetics, durability, and price points. MDF (medium-density fiberboard) is the most affordable and takes paint beautifully, making it the go-to choice for most homeowners. Polystyrene foam molding is ultralight and the easiest to install — ideal for DIYers — but lacks the heft and crispness of wood. Solid wood options like pine, poplar, and oak offer a premium look and can be stained or painted, though they cost considerably more and require skilled installation due to wood movement and tight mitering.
Crown molding is typically estimated by the perimeter of each room. A small bedroom might have 40 linear feet of perimeter, while a large open-plan living area could exceed 100 linear feet. Rooms with vaulted or cathedral ceilings require specialized techniques and often cost 30–50% more per foot due to angle cuts and scaffolding needs.
Professional crown molding installation typically takes a skilled finish carpenter half a day to a full day per room, depending on the complexity. Inside and outside corners are the trickiest parts — compound miter cuts must be precise to avoid visible gaps. Many installers use a combination of miter joints and coping (hand-cutting the profile) for the tightest fit. Rooms with uneven walls or ceilings may require additional time for shimming and caulking. Painting or staining is usually done after installation and may be included in the quote or billed separately.
$25
Labor accounts for roughly 50–60% of crown molding installation costs. Finish carpenters typically charge $3–$8 per linear foot for installation, or $60–$100 per hour. Complex profiles, multi-piece build-ups, and rooms with many corners or irregular angles increase labor time significantly. Expect to pay a premium for vaulted ceiling installations.
Installation takes 1–2 days for a single room or 3–5 days for a whole-house project. Add 1 day for painting or staining if not done by the installer.
Yes — crown molding is consistently cited by real estate agents as one of the best low-cost upgrades for perceived home value. While it may not return its cost dollar-for-dollar, it makes rooms look more finished and can help a listing stand out. Focus on the main living areas and primary bedroom for the biggest impact.
Lightweight foam or MDF molding with simple profiles can be a manageable DIY project if you have a miter saw, coping saw, and patience. However, wood molding in rooms with many corners or uneven surfaces is best left to a professional finish carpenter for a clean, gap-free result.
A professional can typically install crown molding in one average-sized room in 3–5 hours. A whole-house installation (5–8 rooms) generally takes 2–4 days. Painting or staining may add an additional day.
ClearCost is expanding to Minnesota
Get notified when our Fair Market Rate™ calculator and verified contractor matching launches in Minnesota.