Local Fair Market Rate™ pricing for Decatur based on 30030 labor rates and material costs. Prices updated April 2026.
Quick Answer: The average cost of driveway paving in Decatur, GA is $2,735 – $3,495 for a standard-grade project. Economy starts at $2,108; premium can reach $5,117.
Source: ClearCost Fair Market Rate data for 30030 — updated April 2026
Economy
$2,108 – $2,694
Materials: $1,352
Labor: $990 (16.5 hrs)
Standard
$2,735 – $3,495
Materials: $1,869
Labor: $1,170 (19.5 hrs)
Most common choice
Premium
$4,004 – $5,117
Materials: $2,649
Labor: $1,800 (30 hrs)
Local labor rates in Decatur (30030) average $60/hr for driveway paving work. This rate reflects the DeKalb County market and includes typical contractor overhead and profit margins. Labor accounts for 38% of the total project cost in this area.
Decatur (30030)
$2,735 – $3,495
National Average
$2,500 – $10,000
Prices in Decatur reflect local labor availability, material supplier pricing, and regional demand. For a full national breakdown, see our Driveway Paving cost guide.
A well-maintained asphalt driveway lasts 15–25 years. Sealcoating every 2–3 years protects against UV damage and moisture penetration, extending the lifespan toward the upper end of that range. Cracks should be filled promptly to prevent water from eroding the base. Resurfacing can add another 10–15 years when the base is still in good condition.
Asphalt costs 30–50% less than concrete and is easier to repair, but it requires periodic sealcoating and has a shorter lifespan. Concrete lasts 25–40 years with minimal maintenance and offers a cleaner look, but it can crack in freeze-thaw climates and stain from oil and rust. In cold climates, asphalt is generally preferred because it flexes slightly with frost heave.
Asphalt driveways should cure for 3–5 days before driving on them and 30 days before parking heavy vehicles. Avoid turning your steering wheel while parked on new asphalt in hot weather. Concrete driveways need 7 days before vehicle traffic and 30 days to reach full strength. Paver driveways can typically be driven on immediately after installation.
Replacing an existing driveway in the same footprint usually does not require a permit. However, building a new driveway, widening an existing one, or adding a curb cut to the street typically requires a permit and may need to meet municipal stormwater management requirements. Check with your local building department before starting work.
Get a personalized estimate for Decatur
Our Fair Market Rate™ calculator uses 30030 labor rates and material costs to give you a detailed, project-specific price.