Estimated local cost for driveway paving in Utah, based on regional cost-of-living data. Updated April 2026.
Quick Answer: The estimated cost of driveway paving in Utah is $2,475 – $9,850 ($3 – $15 per sq ft). Average: $4,925.Utah is 2% below national average.
Source: ClearCost national data adjusted by BEA Regional Price Parity for Utah — updated April 2026
Utah
$4,925
Estimated range: $2,475 – $9,850
$3 – $15 per sq ft
National Average
$5,000
Range: $2,500 – $10,000
Utah is 2% below national average based on BEA RPP data.
About these estimates: These prices are derived from our national pricing data adjusted for Utah's cost of living (BEA Regional Price Parity: 98.5). Actual costs vary based on specific project requirements, contractor availability, and local material sourcing. See the national cost guide for full details.
A new or resurfaced driveway is one of the most impactful curb-appeal upgrades you can make. The national average cost to pave a driveway is about $5,000, with most homeowners spending between $2,500 and $10,000 depending on the material, size, and existing conditions. Asphalt is the most affordable paving option, while pavers and exposed aggregate concrete offer premium aesthetics at a higher price point.
Material choice has the greatest impact on both cost and longevity of your driveway. Gravel is the cheapest option and works well for rural properties, but it requires periodic regrading and replenishment. Asphalt provides a smooth, clean surface at a moderate cost and can be resurfaced rather than fully replaced when it wears. Concrete is more durable and longer-lasting but cracks in freeze-thaw climates. Pavers offer the most design options and can be repaired piece by piece, but they carry the highest material and labor costs.
A standard two-car driveway is approximately 16–24 feet wide and 20–40 feet long, yielding 400–600 square feet of paving. Single-car driveways are 10–12 feet wide. Longer driveways for properties set back from the road can require 1,000 square feet or more. Per-square-foot costs decrease slightly for larger driveways because mobilization, grading, and base preparation costs are spread over more area. Always account for any turnaround areas or widened sections near the garage.
A driveway is only as good as its base. Proper preparation includes removing the existing driveway surface (if applicable), grading the subsoil for drainage, and laying a compacted gravel base. The base should be 6–12 inches of compacted aggregate for most materials. If the existing driveway is severely cracked or heaved, a full tear-out and replacement of the base is necessary. Resurfacing (overlaying new asphalt on existing asphalt) is possible when the base is still sound and can save 40–60% compared to full replacement.
$25
Driveway paving labor includes demolition of the old surface (if needed), grading, base preparation, compaction, and material placement. Asphalt paving is done by a crew of 3–5 workers with a paving machine and roller, typically completing a standard driveway in a single day. Concrete paving requires forms, pouring, finishing, and several days of curing time. Paver installation is the most labor-intensive, requiring individual placement, cutting, and joint sanding over 2–4 days for a standard driveway.
Asphalt paving takes 1–2 days; concrete takes 1–2 days plus 7 days to cure; pavers take 2–5 days.
A well-maintained asphalt driveway lasts 15–25 years. Sealcoating every 2–3 years protects against UV damage and moisture penetration, extending the lifespan toward the upper end of that range. Cracks should be filled promptly to prevent water from eroding the base. Resurfacing can add another 10–15 years when the base is still in good condition.
Asphalt costs 30–50% less than concrete and is easier to repair, but it requires periodic sealcoating and has a shorter lifespan. Concrete lasts 25–40 years with minimal maintenance and offers a cleaner look, but it can crack in freeze-thaw climates and stain from oil and rust. In cold climates, asphalt is generally preferred because it flexes slightly with frost heave.
Asphalt driveways should cure for 3–5 days before driving on them and 30 days before parking heavy vehicles. Avoid turning your steering wheel while parked on new asphalt in hot weather. Concrete driveways need 7 days before vehicle traffic and 30 days to reach full strength. Paver driveways can typically be driven on immediately after installation.
Replacing an existing driveway in the same footprint usually does not require a permit. However, building a new driveway, widening an existing one, or adding a curb cut to the street typically requires a permit and may need to meet municipal stormwater management requirements. Check with your local building department before starting work.
ClearCost is expanding to Utah
Get notified when our Fair Market Rate™ calculator and verified contractor matching launches in Utah.