Estimated local cost for hardwood floor installation in Miami-Fort Lauderdale-West Palm Beach, FL, based on regional cost-of-living data. Updated April 2026.
Quick Answer: The estimated cost of hardwood floor installation in Miami-Fort Lauderdale-West Palm Beach, FL is $2,850 – $7,425 ($6 – $12 per sq ft). Average: $5,150.Miami-Fort Lauderdale-West Palm Beach, FL is 14% above national average.
Source: ClearCost national data adjusted by BEA Regional Price Parity for Miami-Fort Lauderdale-West Palm Beach, FL — updated April 2026
Miami-Fort Lauderdale-West Palm Beach, FL
$5,150
Estimated range: $2,850 – $7,425
$6 – $12 per sq ft
National Average
$4,500
Range: $2,500 – $6,500
Miami-Fort Lauderdale-West Palm Beach, FL is 14% above national average based on BEA RPP data.
About these estimates: These prices are derived from our national pricing data adjusted for Miami-Fort Lauderdale-West Palm Beach, FL's cost of living (BEA Regional Price Parity: 114.2). Actual costs vary based on specific project requirements, contractor availability, and local material sourcing. See the national cost guide for full details.
Hardwood flooring remains one of the most desirable home upgrades, adding both beauty and resale value. The national average for hardwood floor installation is around $4,500 for approximately 500 square feet, though costs can range from $2,500 to $6,500 depending on the wood species, plank width, and installation method. Solid hardwood and engineered hardwood each have distinct price points — solid oak and maple sit in the mid-range, while exotic species like Brazilian cherry or walnut push costs significantly higher.
The species of wood you choose is the single largest factor in your hardwood flooring budget. Domestic species like oak, maple, and hickory are widely available and moderately priced. Exotic hardwoods such as Brazilian cherry (jatoba), tigerwood, and acacia offer stunning grain patterns and superior hardness ratings but cost significantly more due to import and sourcing costs. Engineered hardwood — a thin veneer of real wood over a plywood core — delivers the look of solid hardwood at a lower price and with better moisture resistance, making it suitable for basements and concrete subfloors.
The installation method affects both cost and suitability for your subfloor type. Nail-down installation is the traditional method for solid hardwood over a plywood subfloor and is the most labor-intensive. Glue-down is commonly used for engineered hardwood over concrete slabs. Floating installation — where planks click together and rest over an underlayment without being fastened to the subfloor — is the fastest and least expensive method, but it is only suitable for engineered products.
Before new hardwood can go down, the existing floor and subfloor must be in proper condition. If you are removing old carpet, tile, or vinyl, demolition costs add to the overall project. The subfloor must be level within 3/16 inch over a 10-foot span — any unevenness requires sanding or self-leveling compound. Moisture testing is critical for concrete subfloors, as excess moisture will warp solid hardwood and void manufacturer warranties.
$50
Labor accounts for roughly 50–60% of total hardwood flooring costs. Nail-down installation of solid hardwood is the most labor-intensive, while floating engineered floors are the quickest to install. Expect a crew of 2–3 installers to complete 200–400 square feet per day for nail-down installations and up to 500+ square feet per day for floating floors. Costs increase for diagonal or herringbone patterns due to additional cutting and waste.
A typical 500 sq ft hardwood floor installation takes 3–5 days. Add 1–2 days for subfloor preparation and 2–3 days if site-finishing with stain and polyurethane.
Solid hardwood floors can last 75–100+ years with proper maintenance. They can be sanded and refinished 6–10 times over their lifespan. Engineered hardwood typically lasts 20–40 years and can be refinished 1–3 times depending on the thickness of the veneer layer.
Yes, engineered hardwood typically costs $4–$9 per square foot installed, compared to $6–$15+ for solid hardwood. Engineered wood also installs faster with floating or glue-down methods, further reducing labor costs. It performs better in moisture-prone areas and over concrete subfloors.
According to real estate studies, hardwood flooring can increase a home's resale value by 3–5%. It is consistently ranked as one of the most desirable flooring features by homebuyers. Homes with hardwood floors also tend to sell faster than those with carpet or laminate.
ClearCost is expanding to Miami-Fort Lauderdale-West Palm Beach, FL
Get notified when our Fair Market Rate™ calculator and verified contractor matching launches in Miami-Fort Lauderdale-West Palm Beach, FL.