Arizona

How Much Does Kitchen Cabinet Installation Cost in Arizona?

Estimated local cost for kitchen cabinet installation in Arizona, based on regional cost-of-living data. Updated April 2026.

Quick Answer: The estimated cost of kitchen cabinet installation in Arizona is $3,975$14,925 ($150 – $600 per linear foot). Average: $7,950.Arizona is 1% below national average.

Source: ClearCost national data adjusted by BEA Regional Price Parity for Arizona — updated April 2026

Arizona

$7,950

Estimated range: $3,975$14,925

$150 – $600 per linear foot

National Average

$8,000

Range: $4,000$15,000

Arizona is 1% below national average based on BEA RPP data.

About these estimates: These prices are derived from our national pricing data adjusted for Arizona's cost of living (BEA Regional Price Parity: 99.5). Actual costs vary based on specific project requirements, contractor availability, and local material sourcing. See the national cost guide for full details.

Cost at a Glance — Arizona

Regionalized Cost Breakdown

National Average$7,950
Typical Range$3,975 – $14,925
Budget (stock cabinets, small kitchen)$2,500 – $4,975
Mid-Range (semi-custom, avg kitchen)$5,975 – $11,950
High-End (custom, large kitchen)$14,925 – $34,825

Kitchen cabinets are the centerpiece of any kitchen and often represent the single largest expense in a kitchen remodel. The national average cost for new kitchen cabinet installation in 2026 is approximately $8,000, with most homeowners spending between $4,000 and $15,000 depending on the cabinet quality, kitchen size, and layout complexity. This cost includes the cabinets themselves and professional installation but does not include countertops, appliances, or other finishes.

Cost by Cabinet Type

Kitchen cabinets fall into three broad categories: stock, semi-custom, and custom. Stock cabinets are mass-produced in standard sizes and finishes — they are the most affordable and available off the shelf at home centers with lead times of just a few days. Semi-custom cabinets are built to order and offer a wider range of sizes, finishes, and interior accessories. Custom cabinets are built from scratch to your exact specifications by a local cabinet maker or specialty manufacturer — they offer unlimited design possibilities but come with the highest price tag and longest lead times.

Cabinet Cost per Linear Foot (materials only)

Stock Cabinets$75$200
Semi-Custom Cabinets$150$400
Custom Cabinets$400$800
RTA (Ready-to-Assemble)$50$150

Cost by Kitchen Size

Kitchen size is typically measured in linear feet of cabinet run — the total length of lower and upper cabinets along each wall. A small galley kitchen might have 12–15 linear feet, while a large L-shaped or U-shaped kitchen can have 25–35+ linear feet. Island cabinets are priced separately and typically cost $1,500–$5,000 depending on size and configuration.

Total Cabinet Cost by Kitchen Size (semi-custom)

Small Kitchen (12–15 linear ft)$2,975$5,975
Average Kitchen (20–25 linear ft)$4,975$9,950
Large Kitchen (30+ linear ft)$7,950$17,900
Kitchen Island (4–8 ft)$1,500$4,975

Installation & Labor

Professional cabinet installation is strongly recommended — even slightly out-of-level cabinets cause doors and drawers to hang poorly and can lead to premature hardware wear. Installation typically takes 2–4 days for a full kitchen, including removal of old cabinets, wall preparation, leveling, securing wall and base cabinets, and installing hardware. Some cabinet companies include installation in their pricing, while others charge separately.

Installation Labor Costs

Old Cabinet Removal$300$800
Wall Prep & Leveling$200$500
Base Cabinet Installation$75$200
Wall Cabinet Installation$75$175
Island Installation$200$500

Labor Costs in Arizona

$49,850

Professional cabinet installation labor costs $2,000–$5,000 for a typical kitchen, representing about 15–25% of the total cabinet project cost. Experienced installers charge $50–$100/hour, and a full kitchen takes 20–40 hours of labor depending on complexity. This includes shimming and leveling, securing to wall studs, scribing filler pieces, aligning doors and drawers, and installing all hardware.

Enhancement & Improvement Costs

Soft-Close Hinges & Drawer Slides$200 – $600
Pull-Out Trash/Recycling System$150 – $400
Lazy Susan Corner Cabinet$200 – $500
Under-Cabinet Lighting$300 – $1,000
Crown Molding & Decorative Trim$300 – $1,200

What Drives the Cost

  • Cabinet quality tier — stock, semi-custom, or custom determines the biggest price difference
  • Kitchen size and layout — more linear feet and complex layouts increase costs proportionally
  • Door style and material — flat-panel (Shaker) is more affordable than raised-panel or slab
  • Interior accessories — pull-outs, dividers, and specialty storage add $50–$300 per cabinet
  • Old cabinet removal — demo and disposal adds $300–$800 to the project
  • Countertop compatibility — some cabinet configurations limit or expand countertop material options

Pro Tips

  • Measure your kitchen carefully and create a detailed layout before shopping — most cabinet suppliers offer free design services
  • Consider RTA or stock cabinets with aftermarket upgrades (soft-close hinges, pull-out shelves) for the best value
  • Order 1–2 extra filler strips and panels — scribing and trimming is almost always necessary
  • Do not skip professional installation unless you have experience with leveling and cabinet hanging
  • Schedule countertop templating only after all cabinets are fully installed and leveled

Stock cabinets are available within a few days. Semi-custom cabinets have a 3–6 week lead time. Custom cabinets take 8–16 weeks. Installation itself takes 2–5 days. Full project timeline from ordering to completed installation is typically 3–18 weeks depending on cabinet type.

Kitchen Cabinet Installation FAQ

Should I reface or replace my kitchen cabinets?

If your existing cabinet boxes are structurally sound and you like the layout, refacing (new doors, drawer fronts, and veneer on boxes) costs 30–50% less than full replacement and takes just 3–5 days. Replace cabinets when the boxes are damaged, you want to change the layout, or you need better-quality construction.

How long does a full kitchen cabinet installation take?

Old cabinet removal takes about a day. New cabinet installation takes 2–4 days for a typical kitchen. If the project includes new countertops (which are templated after cabinets are in), add 1–2 weeks for fabrication and installation. Total timeline from demo to functional kitchen is typically 2–4 weeks.

Are RTA cabinets a good option?

Ready-to-Assemble cabinets offer significant savings (40–60% less than comparable pre-assembled stock cabinets) and have improved dramatically in quality. They are a strong choice for budget-conscious homeowners who are comfortable with assembly or willing to hire someone to assemble and install them. Look for plywood boxes and dovetail drawers as quality indicators.

ClearCost is expanding to Arizona

Get notified when our Fair Market Rate™ calculator and verified contractor matching launches in Arizona.